OverviewThe VT-115S Hot-Wire thermo-anemometer model is a portable, compact digital meter designed for simplicity. VT-115S features a telescopic stainless steel 0.3" (8 mm) diameter, length 3' (1 m) graduate bent at 90° remote probe. The VT-115S anemometer has its own dual display which continuously shows measurements, average, data hold, maximum and minimum values.
- Measure Air Velocity and Temperature
- Measure Air Velocity 30 to 5900 fpm
- Air Flow Rate 0 to 58,857 cfm with optional cone
- Telescopic Stainless Steel 0.3" (8 mm) Diameter Probe
- NTC Temperature Sensor
- Reliable Accurate and Easy to Use
- Large graphic LCD Display
- Display of 2 Measurements Simultaneously
- Hold, Min and Max Function
- ABS IP54 Housing
VT-115S Hot-Wire Thermo-Anemometer Measuring Specifications
|Parameters||Measuring Units||Measuring Range||Range/Accuracy||Resolution|
|Air Velocity||m/s, fpm, km/h||30 to 5900 fms (0.15 to 30 m/s)|| From 30 to 590 fpm (0.15 to 3 m/s): ±(3% rdg ±0.05m/s)
610 to 5900 fpm (3.1 to 30m/s): ±(3% rdg ±0.2m/s)
|Air Flow Rates||m3/h, cfm, l/s, m3/s||0 to 58,887 cfm (0 to 99,999 m3/h)||±3% rdg ±0.03 x area (cm2)||1 m3/H|
|Temperature||C/F Switchable||-20 +80°C||±0.3% rdg +0.25°C||0.1|
|Hotwire Air Velocity Measuring Sensor||Thermistor with negative temperature coefficient (NTC Sensor)|
|Ambient Temperature Sensor||NTC Sensor|
|Probe Diameter||0.3" (8mm) Telescopic hotwire probe bent at 90°|
|Probe Length||12" Stainless Steel|
|Cable Length||Integral 76"|
|Display||4 lines, LCD technology. Sizes 50 x 36 mm.:
2 lines of 5 digits with 7 segments (value) and
2 lines of 5 digits with 16 segments (unit)
|Housing||ABS IP54 Rating|
|Working Environment||Neutral Gas|
|Operating Temperature Instrument and Probe||32 to 122°F (0 to 50°C)|
|Storage Temperature||32 to 122°F (0 to 50°C)|
|Power Supply||4 batteries AAA LR03 1.5 V|
|Conformity||Directives EMC 2014/30/EU and EN 61010-1|
|Battery Life||Approximately 180 hours|
|Meter Dimensions||5.8" x 3" x 1.3"|
K35 Air Flow Cone for VT Series Hot Wire Thermo-anemometer Probes essential instrument for measuring direct air flows in ventilators and HVAC systems.
The K75 air flow cone is an essential instrument for measuring direct air flows in ventilators and HVAC systems.
The K120 air flow cone is an essential instrument for measuring direct air flows in ventilators and HVAC systems.
K150 Air Flow Cone for VT Series Hot Wire Thermo-anemometer Probes for measuring direct air flows in ventilators and HVAC systems.