Log In        Register

New Si-CA 230 - 4 Gas - Flue Gas Combustion Analyzers Measure Sulfur Dioxide (SO2), NO, O2, CO and CO2

Si-CA 230 instrument only (smart phone or mobil device not included)
New Si-CA 230 4 Gas - Flue Gas Combustion Analyzers Measure Sulfur Dioxide (SO2), NO, O2, CO and CO2
    Price Starting At: $3,819.00

    Overview

    The New Si-CA-230 - 4 Gas Sulfur Dioxide Models Flue Gas Combustion Analyzer offers everything heating engineers need to inspect and maintain residential and commercial boilers. Measures Sulfur Dioxide (SO2), Nitric Oxide (NO) and Nitrogen Oxides (NOx), Oxygen (O2), Carbon Monoxide (CO) and calculated Carbon Dioxide (CO2) along with all of the necessary temperature, draft, and pressure measurements for combustion efficiency analysis.
    Features
    • 4.3" (10.9 cm) Large Color Touch Screen with Graphing
    • Combustion Analyzer Measure Sulfur Dioxide (SO2), Nitric Oxide (NO), Oxygen (O2), Carbon Dioxide (CO2), Carbon Monoxide (CO), Excess Air, Efficiency along with all of the necessary temperature, draft and pressure measurements
    • Sulfur Dioxide (SO2) 0 to 5000 ppm
    • Optional Low Sulfur Dioxide (SO2) 0 to 100 ppm Sensor Available
    • Carbon Monoxide (CO) and Carbon Dioxide (CO2) Monitoring in Ambient Air
    • Carbon Monoxide (H2 comp.) Sensor 0 to 10,000 ppm
    • Standard Flue Gas Test Probe 12" (300mm) with 9.8' (3m) dual hose
    • Data management with automatic logging and report creation trough app/PC software
    • One touch pump On/Off with purge
    • Customizable gas analysis screen
    • Field replaceable precalibrated sensors
    • PC software with wireless and USB connectivity
      Shipping Estimated Shipping 1 to 2 Weeks

    Si-CA 230 - 4 Gas - Sulfur Dioxide Models Flue Gas Combustion Analyzer Measurement Specifications
    Parameter Sensor Type Range Resolution Accuracy
    Sulfur Dioxide (SO2 Electrochemical 0 to 5000 ppm 1 ppm ±5 ppm <100 ppm
    ±5% rdg >100 ppm
    Optional Low Sulfur Dioxide (SO2) Electrochemical 0 to 100 ppm 1 ppm ±1.5 ppm <30 ppm
    ±5% rdg >30 ppm
    Nitric Oxide (NO) Electrochemical 0 to 5000 ppm 1 ppm ±5 ppm <100 ppm
    ±5% rdg for >100 ppm
    Nitrogen Oxides (NOx) Calculated 0 to 7500 ppm 1 ppm  ----
    Oxygen (O2) Electrochemical 0 to 25% 0.01% /td> ±0.2% Volume
    Carbon Monoxide (CO)   (H2 comp.) Electrochemical 10,000 ppm 1ppm ±8 ppm <160 ppm
    ±5% rdg up to 2000 ppm
    ±10 % rdg for >2000 ppm
    Carbon Monoxide (CO) (with dilution) Electrochemical 100 to 50,000 ppm 1ppm ±10% rdg
    Carbon Dioxide (CO2) Calculated 0 to 99.9% 0.1%  ------
    Flue Gas Temperature
    (Accuracy given for the analyzer only)
    Type K Thermocouple -4 to 2282°F
    -20 to 1250°C
    0.1°F/°C ±3.6°F or ±0.5% rdg
    ± 2°C or ±0.5% rdg
    Air temperature NTC or Type K Thermocouple -4 to +248°F
    -20 to 120°C
    0.1°F/°C ±3.6°F
    ±2°C
    Differential Temperature Calculated 0 to 2282°F (0 to 1250°C) 0.1°F/°C  -----
    Pressure/Draft Semiconductor -80 to +80 inH2O
    -200 to +200mBar
    0.001 inHO
    0.01mBar
    ±1% rdg ±0.012 inH2O
    ±1% rdg ±0.03 mbar
    High Accuracy Draft Semiconductor 500 Pa 0.1 Pa ±0.5 Pa < 10Pa
    ±3Pa up to 150 Pa
    ±2% rdg > 150 Pa
    Excess Air Calculated 0 to 999% 1%  ----
    Efficiency (For Higher Heating Value) Calculated 0 to 100%(Gross/HHV) 0.1%  ----
    Efficiency Condensation (For Lower Heating Value) Calculated 0 to 125%(Net/LHV) 0.1%  ----
    Stack Gas Velocity Calculated 0 to 99 m/s
    0 to 19,500 fpm
    0.1% m/s
    1 fpm
     ----
    Si-CA 230 - 4 Gas Sulfur Dioxide Models Flue Gas Combustion Analyzer General Specifications
    Display Large Color Touch Screen with Graphing 4.3" (10.9 cm), 480 x 272 pixels
    Flue Gas Test Probe 12" (300 mm) Long, 9.8' (3 m) Dual Hose, Temperature Range 1472°F (800°C)
    Keypad 1 Key On/Off
    Communications Connection Wireless: class 2 range, range frequency from 2402 MHz to 2480 MHz with a transmit power of 1 dBm.
    Range up to 15 m (50 ft), depending on smartphone radio strength
    Minimum required versions: Android 5.0, iOS 12.4, BLE 4.0
    Power Supply Rechargeable battery, USB power supply
    Li-Ion 5100 mA/h 3.6 V battery
    Power supply voltage of the mains unit: 100 to 240Vac, 50 to 60 Hz
    Mains unit: 5 Vdc/2A
    Battery Life/Charging Time > 8 hours Charging time: Fully charge: <6.5 hours; 50%: <2.5 hours
    Memory Internal memory up to 2000 tests
    Operating Temperature 23 to 113°F (-5°C to +45°C)
    Storage Temperature -4 to 122°F (-20°C to +50°C)
    Operating Humidity Range <85% RH (In Non-Condensing Conditions)
    Air Pressure Atmospheric Maximum altitude: 6561' (2000m)
    Outer Dimensions Analyzer 11 x 4.3 x 2 inches (28 x 11.2 x 5.5 cm) (Height x Width x Depth)
    Analyzer Material ABS-PC
    Analyzer Protection IP 42
    Analyzer Weight Approx. 30 Oz (825 g)
    Languages English, French, German, Spanish, Italian, Portuguese
    Si-CA 230 - Apps and PC Software Features
    • Free apps for iOS & Android mobile devices
    • PC software with USB & wireless connectivity
    • Fast, easy wireless connection
    • Remote live view of combustion analysis data as list or graph
    • Remote control to change settings
    • Data saving, including automatic logging
    • Report creation in PDF, CSV (for Excel) and XML formats
    • Databases for customers, operators & equipment

    Each Si-CA 230 - 4 Gas Sulfur Dioxide Flue Gas Combustion Analyzer Kit includes Analyzer with CxHy (Hydrocarbons), Nitric Oxide (NO), Oxygen (O2), Carbon Monoxide (CO) Sensors, Protective rubber holster, 12" (300 mm) Flue gas probe with 9.8' (3 m) dual hose probe rated to 1472°F (800°C), Water trap with filter, AC power supply/charger, USB cable, Mobile app and PC Software, Internal wireless communication module, Carrying case, Quick Start Guide, Calibration certificate.
    close