Your Cart (0)
Thumbnail Filmstrip of 16C 1/16 DIN 8 Level Ramp and Soak, Thermocouple, RTD and Process Temperature Input Controller Images
16C 1/16 DIN 8 Level Ramp and Soak, Thermocouple, RTD and Process Temperature Input Controller
Overview
The Athena 16C 1/16 DIN panel mounted is a 8 Level Ramp/Soak Control autotuning, PID controller that can be used for precise control of a single loop with two independent outputs field configurable as direct acting, reverse acting or alarm. The 16C Controller can be programmed for 7 thermocouple, Pt100 RTD or process signal inputs. The two digital LED displays provide visual indication of the process temperature and the process setpoiont and various controller functions.Features
- Field-Configurable Universal Inputs
- User-Selectable Ramp to Setpoint
- 8 Level Ramp/Soak Control
- Bumpless Auto/Manual Transfer
- NEMA 4X (IP65) Dust and Splash-Proof Front Panel
- On/Off through Full PID Operation (P,PI,PD,PID)
- Adjustable Hysteresis Heat Spread
- Optional Dual Output/Dual Alarm Capabilities
- Optional Process Variable Retransmission
- Optional Field-Configurable Process, Deviation, or Latching or Non-Latching Alarms
- Remote Setpoint Select Option
- cUL and CE Approvals
Price Starting At:
$335.00
$335.00
Shipping Click Add to Cart to Configure Input and Output Options
Estimated Shipping 2 to 4 Weeks
Estimated Shipping 2 to 4 Weeks
C Series 16C Temperature Controller Technical Specifications
| Ambient Temperature | 32°F to 131°F (0°C to 55°C) |
| Relative Humidity Tolerance | 90% non-condensing |
| Line Voltage | 100 to 250 Vac; 125 to 300 Vdc; 24 Vac/dc optional |
| Power Consumption | Less than 6 VA (instrument) |
Performance Specifications
| Accuracy | +0.20% of full scale (+ 0.10% typical), + 1 digit |
| Setpoint Resolution | 1 count/0.1 count |
| Repeatability | ±1.0 count |
| Temperature Stability | 5 µV/°C maximum |
| TC Cold End Tracking | 0.05°C/°C ambient |
| Noise Rejection | 100 dB common mode; 70 dB series mode |
| Process Sampling | 10 Hz (100 ms.) |
| Digital Filtering | Adjustable 0.1 to 10 |
Control Characteristics
| Setpoint Limits | Span of Sensor |
| Alarms | Adjustable for high/low; selectable for process or deviation |
| Proportional Band | 2 to span of sensor |
| Integral | 0 to 9600 sec. |
| Derivative | 0 to 2400 sec. |
| Cycle Time | 0.2 to 120 sec |
| Gain | 0 to 400 |
| Gain Ratio | 0 to 2.0 (in 0.1 increments) |
| Control Hysteresis | 1 to span of sensor |
| Dead Band (Output 1 & 2) | Range of Sensor |
| Ramp to Setpoint | 1 to 9999 min |
| Auto-Tune | Operator initiated from front panel |
| Manual Control | Operator initiated from front panel |
Outputs
| # 1 Reverse-acting (Heating) | B: 5 A /3 A (120/240 Vac), normally open used for switching resistive loads G: 4-20 mA, full output to load 800 ohm impedance max S: 20 Vdc pulsed output for solid-state relays T: 1 A @ 120/240 Vac , solid-state relay, zero voltage-switched and optically isolated from drive signal |
| Optional #2 Direct-acting (Cooling) | B: 5 A /3 A (120/240 Vac), normally open used for switching resistive loads G: 4-20 mA, full output to load 800 ohm impedance max S: 20 Vdc pulsed output for solid-state relays T: 1 A @ 120/240 Vac , solid-state relay, zero voltage-switched and optically isolated from drive signal |
Mechanical Characteristics
| Display Dual | 4-digit 0.36" (9.2 mm) LED |
| Display | Process Value Orange Setpoint Value Green |
| Numeric Range | -1999 to 9999 |
| Front Panel Rating | EMA 4X (IP65) |
| Front Panel Cutout | 1.771" x 1.771" (45 mm x 45 mm) |
| Connections | Screw Terminals |
Input Types User Programmable
| Sensor Input | Type J TC | Range | -328 to 1400°F -200 to 760°C |
| Sensor Input | Type K TC | Range | -454 to 2469°F -270 to 1354°C |
| Sensor Input | Type T TC | Range | -454 to 752°F -270 to 400°C |
| Sensor Input | Type E TC | Range | -238 to 1832°F -150 to 1000°C |
| Sensor Input | Type N TC | Range | -450 to 2372°F -268 to 1300°C |
| Sensor Input | Type R/S TC | Range | -58 to 3215°F -50 to 1750°C |
| Sensor Input | 100 ohm RTD | Range | -328 to 1562°F -200 to 850°C |
| Sensor Input | 100 ohm RTD | Range | -328.0 to 707.0°F -200.0 to 375.0°C |
| Sensor Input | 0 to 5V | Range | Scaleable |
| Sensor Input | 0 to 10mV | Range | Scaleable |
| Sensor Input | 0 to 50mV | Range | Scaleable |
| Sensor Input | 0 to 100mV | Range | Scaleable |
| Sensor Input | 10 to 50mV | Range | Scaleable |
| Sensor Input | 4 to 20mA | Range | Scaleable |
| Sensor Input | 0 to 20mA | Range | Scaleable |
| Sensor Input | 0 to 1v | Range | Scaleable |
| Sensor Input | 0 to 10v | Range | Scaleable |
The C series 16C controllers may be configured with Communication, Transducer Excitation and Auxiliary alarms options, Please contact us for details and ordering information.