Your Cart (0)
Thumbnail Filmstrip of New RHT-P10 Humidity, Dew Point, Temperature Transmitter for Pressurized Environments Vacuum Chamber Images
New RHT-P10 Humidity, Dew Point, Temperature Transmitter for Pressurized Environments Vacuum Chamber
Overview
The RHT-P10 transmitter are highly accurate and stable sensors for measuring Relative Humidity, Dew Point and Temperature. The measured values are converted into 4 to 20 mA output signals that are linearly related to their readings. Since RHT-10P is microprocessor-based devices, they can be configured using the Optional TxConfig-USB communication interface and the SigNow app or software, which is available for Android and Windows. The outputs can be configured to retransmit temperature, relative humidity, or dew point.Features
- Pressure up to 10 BAR
- Microprocessor Based Humidity and Temperature Transmitter
- Field Programable with Optional TxConfig-USB configuration interface and SigNow software
- Isolated Two-wire loop powered 4 to 20mA
- Accuracy Relative Humidity: ±3 % RH @ 77°F (25°C)
- Temperature Accuracy ±0.72°F (0.4°C) @ 77°F (25°C)
- Power 12Vdc to 30Vdc (4 to 20mA model)
- Electronic circuit case IP65; Sensors capsule IP40
Price Starting At:
$272.00
$272.00
Shipping Estimated Shipping 1 to 4 Weeks
RHT-P10 Measurement Specifications
| Sensor Measuring Range, | Temperature: -40 to 248°F (-40 to 120°C) Relative Humidity: 0 to 100% RH (non-condensing) Dew Point: -148 to 217.4°F (-100 to 103°C) |
| Response Time: | Temperature: up to 30s @ 77°F (25°C) with air moving at 1 m/s or 3.28 ft/s Humidity: up to 8s @ 77°F (25°C) with air moving at 1 m/s or 3.28 ft/s |
| Measurement Accuracy: | Temmperature: ±0.9°F (±0.4°C) @ 77°F (25°C) Relative Humidity: ±3% RH @ 77°F (25°C) |
| Analog Outputs | 4 to 20 mA or 20 to 4 mA, 2-wire type, loop-powered |
| Analog Outputs Resolution: | 0.0008 mA |
| Operating Temperature |
-4 to 158°F (-20 to 700°C), 0 to 95% RH |
| Connections:> | Internal terminal block, via cable glands |
| Housing Material | Housing PA-GF |
| Sensor Material | Remote Sensor Module 316 Stainless Steel |
| Housing and Sensor Ratings | Housing Enclosure: IP65, Sensor: IP40 |
| Configuration | Optional TxConfig-USB configuration interface and SigNow software for Windows or Android |
RHT-WM General Specifications
| Power Supply | 12Vdc to 30Vdc |
| Outputs | 4 to 20mA or 20 to 4mA 2-wire loop power supply |
| Output Load | RL (max. in Ohms) = (Vdc - 12)/ 0.02, where: Vdc = Supply Voltage in Volts. |
| OUT1 and OUT2 Output Resolution | 0.0008 mA (4-20 mA) |
| Isolation between outputs | Isolated 4 to 20mA outputs from each other. |
| Reverse Polarity Protection | Yes |
| Operating Temperature Humidity | -4 to 1580°F (-20 to 700°C) 0 to 95% RH |
| Storage Temperature Humidity | -4 to 1760°F (-20 to 800°C) 0 to 95% RH |
| Cable Gland | Compress fitting PG7 |
| Case Dimension | 2.8" (70mm) W x 2.4" (60mm) H with Probe 3.1" (78.5mm) |
Related Products
