Secure Checkout
RHT-DM Duct Mounted Humidity and Temperature Transmitter

Thumbnail Filmstrip of RHT-DM Duct Mounted Humidity and Temperature Transmitter Images

    RHT-DM Duct Mounted Humidity and Temperature Transmitter

    Overview

    The RHT-DM duct mounted temperature and humidity transmitters incorporate the best high accuracy and great stability relative humidity and temperature sensors. The RHT-DM convert the measured values into linear 4 to 20 mA signals or optionally 0 to 10 Vdc output. The microprocessor based circuit enables full configuration of output range when used with the optional TxConfig PC interface and the Windows® based software. The humidity signal can be configured to either relative humidity or dew point output.
    Features
    • Microprocessor Based Temperature and Humidity Transmitter
    • Field Configurable with Optional TxConfig PC interface and the Windows® based software
    • Two Probe Lenghts Available 150mm or 250mm
    • Two-wire loop powered 4 to 20mA, 20 to 4mA or Voltage output 0 to 10Vdc
    • Isolated 4 to 20mA outputs, Non-isolated 0 to 10Vdc outputs
    • Humidity Accuracy Between 20% and 80% humidity 3% at 25°C
    • Temperature Accuracy Between -40°C and 80°C ±2.2°C at 25°C
    • Power 12Vdc to 30Vdc (4 to 20mA model) or 18 to 30Vdc (0 to 10Vdc model)
    • Electronic circuit case IP65; Sensors capsule IP40
    • Internal protection against reversed voltage wire polarity
    • Operational Limits Electronic Module -10 to +65°C, 0 to 95%RH
    Price Starting At:
    $238.00
    Need help? Contact us with questions.

      Shipping Estimated Shipping 1 to 4 Weeks
    RHT-DM Humidity Measurement Specifications
    Measuring Range programmable anywhere from 0 to 100%RH or from -100 and 103°C for dew point
    Output Resolution 0.022mA (4 to 20mA) or 0.015V (0 to 10V)
    Accuracy Between 20% and 80% humidity 3% at 25°C
    Repeatability ±1%RH
    Histeresis ±1%RH
    Non-linearity <1%RH
    Stability <1%RH per year
    Response Time 4 seconds in fairly still air
    RHT-DM Temperature Measurement Specifications
    Measuring Range programmable between -40 and 120°C
    Recommended Temperature range -20 to 100°C
    Accuracy Between -40°C and 80°C ±2.2°C at 25°C
    Output Resolution 0.006mA (4 to 20mA) or 0.003V (0 to 10V)
    Repeatability ±0.1°C
    Humidity Response Time 4 seconds in fairly still air
    RHT-DM General Specifications
    Power Supply 12Vdc to 30Vdc (4 to 20mA model)
    18 to 30 Vdc/15mA. (0 to 10V model)
    Electronic Circuit -10 to +65°C, 0 to 95% RH
    Outputs 4 to 20mA or 20 to 4mA current, 2-wire loop power supply
    0 to 10Vdc/2mA max. (0 to 10V model)
    Output Load 4 to 20mA output(Ohms max.) = (Vdc - 12)/0.02 let Vdc = Loop power supply (12 to 30 Vdc)
    0 to 10 Vdc output: 2mA max.
    OUT1 Output Resolution 0.006 mA (4 to 20mA) or 0.003V (0 to 10V)
    OUT2 Output Resolution 0.022mA (4 to 20mA) or 0.015V (0 to 10V)
    Channel Isolation 4 to 20mA outputs are isolated from each other
    0 to 10V outputs share a common ground
    Reverse Polarity Protection Yes
    Protection Electronic circuit case: IP65
    Sensors capsule: IP40
    Cable Gland Compress fitting PG7
    Case Dimension 70mm W x 39mm H 35mm D
    Sensor Dimensions 150mm or 250mm

    Related Products