Log In        Register

Martel BetaGauge 330-30 PSI Absolute Hand Held Pressure Calibrator with Integral Electric Pump Pressure

BetaGauge 330-30A PSI Absolute Pressure Calibrator with Integral Electric Pump
    Price Starting At: $3,599.99


    The BetaGauge 330-30A is a revolution in pressure calibration technology for the process industries it has a 0 to 30 PSIA /0 to 2 bar Absolute, internal range with a battery operated Integrated Electric Pump. With the BetaGauge 330-30A, technicians have a small, lightweight calibrator that generates from high vacuum to 300 PSI using a high performance integral electric pump. Gone is the drudgery of manual pumping or using large, heavy and unwieldy boxes with limited portability and poor battery life.
    Performance doesn’t stop with the pump. The BetaGauge 330 provides ±0.035% of full scale accuracy on its internal, isolated pressure sensor. Temperature compensation on its internal sensor ensures accuracy in field applications. An external pressure module connection supports all 29 ranges of BetaPort-P pressure modules for even greater measurement capability when combined with the optional BPPA-100 module adapter.
    • Internal pressure range 0 to 30 PSIA /0 to 2 bar Absolute
    • Accuracy of 0.035% of full scale on pressure measurement
    • Pressure displayed in the user’s choice of 16 engineering units
    • Pt100 RTD input for temperature measurement, accurate to ±0.2°F (±0.1°C) (measurement only)
    • Source or measure 4 to 20mA including 2 wire transmitter simulation
    • Only 8" x 4" x 2 3/8" (20 cm x 10 cm x 6 cm) HWD
    • Clearbrite LCD with backlight can be configured to display up to 3 variables displayed simultaneously (user controlled)
    • Store and recall 5 user defined setups
    • Pressure displayed in the user’s choice of 15 engineering units
      Shipping Please Call for availability

    BeatGauge 330-30A Pressure Calibrator Specications
    Pressure Range 0 to 30 PSIA /0 to 2 bar A
    mA 0 to 24 mA, max, load 1000 Ohms
    RTD Pt100-385, -40 to 150°C
    Engineering Units psi, bar, mbar, kPa, MPa, kg/cm2, cmH2O@4°C, cmH2O@20°C, mmH2O@4°C, mmH2O@20°C, mmHg@0°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, inHg@0°C
    Instrument Power Supply 24 VDC at 24 mA
    Pressure Accuracy ±0.035% of full scale on internal sensor module dependent for external sensors
    Add 0.002% FS/°C outside of 15 to 35°C
    mA ±0.015% of reading ± 2 counts (simulation and measurement)
    Volts ±0.015% of reading ± 2 counts (measurement only)
    Temperature ±0.1°C (0.2°F) (measurement only) (Pt100 RTD)
    BeatGuage 330 General Specications
    Integrated internal electrically operated pneumatic pump generates -12 PSI to 300 PSI pressure (-0.8 to 20 Bar, -80 to 2000 kPa)
    Operating Temperature -10 °C to +50 °C
    Storage Temperature -20°C to +60°C
    Power Requirements Battery Eight (8) standard Alkaline AA batteries
    Battery Life 100 pump cycles to 300 PSI minimum, 1000 pump cycles to 30 PSI
    Dimensions 8" high x 4" wide x 2-3/8" deep (20 cm x 10 cm x 6 cm)
    Weight 2.5 pounds (1.2 kg)
    Pressure Connections 1/8” female NPT - Stainless Steel
    Electrical Connections Standard banana jacks
    RTD 4 pin LEMO style
    External module 6 pin LEMO style
    Each BetaGauge 330-30A comes complete with LDT-500 liquid/dirt trap, NIST traceable calibration certificate, batteries installed, test leads, test hose, fittings, user guide and deluxe soft sided carrying case.