Log In        Register

TPI 1010A Multifunction Indoor Air Quality Measure CO2, CO, RH and % Outside Air

TPI 1010A Multifunction Indoor Air Quality Measure CO2, CO, RH and % Outside Air
    Price Starting At: $995.00

    Overview

    Measure ambient Carbon Dioxide (CO2), Carbon Monoxide (CO), temperature, relative humidity, dew point, wet bulb and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices. The 1010A IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature.
    • Calculate percent outside air to maintain acceptable CO2 levels in buildings and work spaces
    • Measure and display Carbon Dioxide (CO2) and Carbon Monoxide
    • Measure ambient air temperature
    • Measure relative humidity, dew point and wet bulb
    • Log up to 4,000 readings in 1 second to 1 hour intervals
    • Download to a computer using the A368 USB cable
    • New! Print via to optional Infrared printer (Model A740)
      Shipping Estimated Shipping 1 to 2 Weeks

    TPI 1010A Indoor Air Quality Meter Measuring Specifications
    Parameters Range Accuracy
    Carbon Dioxide (CO2) 0 to 5000ppm 50°F to 104°F ±5% of rdg+75ppm
    <50°F, >104°F ±10% of rdg+75ppm
    Carbon Monoxide (CO) 0 to 500ppm ±3ppm or ±5% of rdg whichever is greater
    Humidity 5 to 95% RH 2% RH
    Wet Bulb Temperature Range 3°F to 135°F (-16°C to 57°C) Calculation
    Dew Point Temperature Range -47°F to 135°F (-44°C to 57°C) Calculation
    Temperature -5°F to 140°F (-20°C to 60°C) ±2°F (±1°C)
    % Outside Air Range 0 to 100% ±Calculation
    TPI 1010A General Specifications
    Data Logging Up to 4,000 samples 1 sec to 23hr 59min interval
    Display Type 3 line with annunciators and backlight
    Carbon Dioxide (CO2) Alarm Audible and visual, selectable level (factory default 30ppm)
    Operating Temperature CO and CO2 14°F to 122°F (-10°C to 50°C)
    Operating Humidity 15 ~ 95% non-condensing
    All Other Function -4°F to 140°F (-20°C to 60°C)
    Storage Temperature -4°F to 140°F (-20°C to 60°C)
    Communication Port Serial output via USB connection
    Infrared output to optional A740 printer
    Power supply 3 AA batteries ( 4.5V)
    Battery Life 40 hours typical without backlight
    The TPI 1010A Indoor Air Quality meter comes complete with Protective Rubber Boot, Soft Carrying Case, USB Cable & Software and Instruction Manual.

    Related Products


    A740 - Infrared Printer for TPI-700 Series Flue Gas Analyzer
    A740 - Infrared Printer for TPI-700 Series Flue Gas Analyzer

    A740 Infrared Printer for TPI-700 Series Flue Gas Analyzer. Included with ALL 7XXA740 models.

    $200.00
    close