|
|
 |
DIN Rail Mounted 2-Wire 4 to 20mA
Microprocessor Based Transmitter with Pt100 RTD Input
Features
•
New
MP88800R FM or ATEX Approvals Standard
• Programmable
Microprocessor-Based
•
Pt100 RTD Input Only
• Field
Programmable with
optional Programming Kit and PC
Software
•
Fully Linearized
• RFI/EMI-Immune
•
High Accuracy 0.1%
• Fits on Standard DIN Rails
• Ideal for use in High Density
Cabinet Applications
The Mp88800R is one of the smallest, most advanced intrinsically safe two-wire rail-mounting programmable transmitter available. Less than 1" wide and mounting on standard DIN
rails, it is quickly and easily programmed to your exact PT100 RTD requirements via your personal computer and our “Point ‘N Click” Software/Interface allowing you
to have a single transmitter to meet all of your Pt100 requirements.
|
MP88800R Series
Prices Start at $90.00
|
|
IF700-USB Optional Field Programming
Module |
|
The Mp88800R is scalable from -200°C to the upper limit of Pt100 RTD's (850°C). Features include: 25°C (40°F) minimum span, complete linearization; selectable 4 to 20 mA or
20-4 mA output; wide power supply capability (13-40 Vdc); selectable upscale/downscale; total RFI-immunity (DC to 1 GHz.); high loop drive capability (600 ohms @ 24 Vdc);
and a five (5) year warranty against failure. It even has dual 10-character alphanumeric tagging capability.
There is no longer any reason to stock several different transmitters when a single, low-cost, high accuracy unit can meet all of your requirements. Easily
programmed in less than one minute, the Mp88800R is THE single transmitter different Pt100 range requirements.
Intrinsically Safe Ratings
The model Mp88800R comes standard with either EX ATEX Intrinsically-Safe Approval (Ex ia IIC T5) or FM Intrinsically-Safe Approval (FM: IS/I/I/ABCD/T6).
Specifications
RTD Input: Pt100
Minimum Span: 25°C
Output:
4 to 20mA or 20 to 4mA
Linearization: On/Off
Supply **:
10 to 40Vdc, Polarity Protected
Supply Effect: 0.001%/V
Max.
Ripple: 10 V PP. Min. Vbat =10Vdc
Zero Drift: ± 0.01%/°C or ±0.02°C/°C
Span Drift: ± 0.005%/°C or ±0.01°C/°C
Long Term Drift: ± 0.05%/Year
Cold Junction Drift: ± 0.01°C/°C
Excitation Current RTD: 0.1mA
Sensor Lead Resistance RTD: 500 Ohm max.
Open Circuit Detection: Upscale/Downscale
Programmable
Load Capability:
Vbat-10V/20mA
Response Time: <3
sec.
Startup Time: 20 sec.
Warm-up Time: 5 Min.
Ambient Operating Temperature: -40 to +
85°C (-40 to 185°F)
Storage Temperature:
-40 to +100°C (-40 to 212°F)
Ingress
Protection: IP30
Housing
Material: Makrolon
Housing
Dimension: 0.89" x 2.92" x 3.9 (22.5 x 75 x
99mm)
MP88800R ATEX
Safety Ratings
ATEX parameters (refer
to certificate) KEMA 03ATEX 1419 X
Mp88700 |
CE 0344 Ex II 1 G EEx ia IIC T4...T6 |
Maximum Ambient Temperature |
Temperature Class |
+ 60°C |
T6 |
+ 75°C |
T5 |
+ 85°C |
T4 | *
Supply circuit |
KL5 and KL6 | Input
circuit |
KL1...KL4 |
Ui = | 30 V |
Uo = |
7.2 V |
Ii = | 100mA |
Io = |
58mA |
Pi = | 750mW |
Po = |
10 mW |
Li = | 0mH |
Lo = |
10mH |
Ci = |
0nF |
Co = |
13.5 µF |
|
|
|
Multifunction Temperature and Process Calibrators,
Thermocouple and mA Calibrators,
Thermocouple and RTD Dry Block Calibrators,
Portable Infrared Thermometers,
Fixed Mounted Industrial Infrared Thermometers,
Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters,
Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers,
MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors,
Industrial Test tools and Multimeters, Indoor Air
Quality (IAQ) and Test Meters,
Hand Held Humidity and Air Flow Meters,
Industrial Portable
Refrigerant and Gas Leak Detection Meters,
Pressure Measurement and Calibration Instruments,
Boiler Flue Gas
Combustion Emission Analyzers,
Solar Radiation Meter
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2012 Temperature & Process Instruments, Inc. |
|
|
|
