|
|
 |
NEW MicroRay Food Series Infrared Thermometers Designed
for the Food Service Professional Affordable for Your Home Kitchen
The MicroRay Food Series of infrared (IR) thermometers are
the ideal tools to measure the temperature as required by the FDA (Food and Drug Administration) regulation and HACCP
(Hazard Analysis Critical Control Points) guidelines for food safety.
The MicroRay Food Series measures temperature using non contact Infrared temperature
technology in the Critical Control Points (CCP). The nine areas were identified as CCP to monitor food safety, as defined
by HACCP guidelines: Food procurement, Food storage, Food packaging, Pre-preparation, Cooking, Food storage after cooking,
Rethermalizing, Food product distribution display and Food Serving. •
Professional and Affordable for Food Safety Applications Fundamental Tool for HACCP
• Laser Sighting Standard
• Temperature Range: -22°F to
+572°F (-30 to 300°C)
• HACCP Danger
Zone Alarms
• Hi-Low
Alarms MicroRay Food Visual only; FOOD+/FOOD++ Visual and Audible
• Non Contact Temperature Measurement without Risk of Contamination
• IP54 Hand Washable
• FOOD+ Optional PC Interface and
Graphing Interface with USB Cable (Standard on the FOOD++)
• FOOD+/FOOD++ Built-in Contact Probe Connector
• Ideal for Monitor, Receiving, Storage, Cooking, Cooling, Reheating,
Holding, and Serving Temperatures
|
MicroRay Food
Price Start at $93.00
|
HACCP Danger Zone Alarms
The MicroRay Food quickly measure
food surface temperature and visible alarms safe or unsafe readings with icons on display. The icons indicates immediately
if food temperatures are within HACCP guidelines for safe hot or cold food holding. The MicroRay Food+ includes an audible
Beep when the Alarm appears.
Laser Sighting - US Ultra
Sharp
All models are equipped with
a Class II Laser sighting system for aiming purposes. The offset laser sighting will allow you to identify the approx. center
of the target being measured.
Using the most advanced technology, the MicroRay FOOD++ has a laser sighting
with a reflex system of the beam passing through the center of the lens, which grants the best possible accuracy when aiming
at a distance.
Datalogging
The MicroRay FOOD+/FOOD++ can store
up to 64 test points with date and time using the internal real time clock. Datalogging can be manual or automatic with settable
sampling time. All three of the MicroRay Food models include a programmable 8 hours countdown timer to help monitor cooking,
cooling, and holding times.
Built-In Contact Probe
The MicroRay FOOD+/FOOD++ are equipped
with a connector for contact measurement using a Pt1000 RTD Temperature Sensor. The available temperature probes include a
Contact, Immersion, Penetration, and Ambient Air. One optional 2.5" compact probe can actually be stored inside the unit for
easy access. Longer probes are available if needed and provided with a wire connection.
Documenting and DataLogging Software for Windows™ The optional Logman Sofware is compatible with Windows 98/2000/XP and can download data
via the USB port and cable. The USB port is available on MicroRay Food+. You can download up to 64 tests or run
on-line logging storing data directly on PC. You can view, print, graph and export an Excel file. Part
Number EE420375 - PC Software & USB Cable Kit, $152.00.
|
| Optional LogMan PC Software |
|
|
Transportation and Receiving
The first step to ensure food safety
begins from transportation and receiving. The MicroRay FOOD Series will help you by quickly scanning fresh or frozen
food when receiving a delivery.
|
|
Storage
Frozen and chilled food have to be stored at 4.4°C
(40°F) or below to avoid bacteria growth. In food stores and supermarkets it is important to frequently inspect refrigerated case temperature to check for dangerous warm spots.
|
|
Cooking - Cooling - Reheating
Monitoring temperature is important also for gourmet
cooking. Professional chefs and industrial food manufacturers have to check food temperature for best food quality.
Serving and Holding
Any serving and holding of food requires
you to inspect the external temperature of the food to assure that it is not in the HACCP danger zone.
|
|
Specifications
Spectral Response:
8 to 14µm
Optics: 12:1
Response
Time: 500 ms @ 95% response
Display Resolution:
Food/Food+: 0.2°F from -22 to 32°F - 0.1°F up to 392°F; 1°C otherwise; FOOD++ 0.1°F
Emissivity: adjustable
from 0.20 to 1.00 (preset on 0.95)
Auto Power Off: Automatic
if no key is pressed for more than 30 seconds
Accuracy IR Channel:
from -22°F to 32°F : 2.7°F; 32°F to 210°F : 0.1°F; 210°F to fs : 1.5% of the reading
Repeatability IR Channel:
0.5% of the reading or 1.26°F from 32°F
Power Supply: 9V
alkaline
Battery Life: 40 hours (back
light and laser Off) - 20 hours (On)
Operative Temperature:
32 to +122°F 10-95% RH non condensing up to 86°F
Storage Temperature:
-4°F to +140°F without battery
Tripod mounting:
0.25" 20 UNC threading
Dimensions - Weight:
5.5" x 3.5"x 1.4" - 6 oz. net
FOOD+/FOOD++
External Channel:
Resistance high accuracy platinum Pt1000
External Channel Range:
-22°F to 932°F
External Channel Accuracy:
0.2% of reading or 0.2°F
|
|
|
|
|
Each Instrument includes a 9V battery and instruction manual.
Click Here To Order: MicroRay Food+ Infrared Thermometer. Prices Start at $145.00.
Each Instrument includes a 9V battery and instruction
manual, 64 point data memory, USB Communication Connector and Contact Temperature Probe Connector.
Click Here To Order: MicroRay Food++ Infrared Thermometer. Prices Start at $198.00
Each Instrument includes a Rugged ABS Carrying case, 5" Insertion contact temperature sensor, 64 point
data memory, TTA Laser Sighting, USB Communication Connector, 9V battery and instruction manual.
|
|
|
|
|
|
|
|
|
|
|
|
Multifunction Temperature and Process Calibrators, Thermocouple and mA Calibrators, Thermocouple and RTD Dry Block Calibrators, Portable Infrared Thermometers, Fixed Mounted Industrial Infrared Thermometers, Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters, Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers, MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors, Industial Test tools and Maintenacnce Kit, Indoor Air Qualitity (IAQ) and Test Meters, Hand Held Humidity and Air Flow Meters, Industrial MicroTool Portable Gas Leak Detection Meters, Pressure Measurement and Calibration Instruments
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2009 Temperature & Process Instruments, Inc. |
|
|
|
