Welcome to Temperature & Process Instruments, Inc.

MC1210 Multifunction Dual Display Temperature, Pressure and Process Calibrator

Precision Dual Display Multifunction Calibrator

New MC-1210 Multifunction Temperature and Process Calibrator Supplied with Protective Rubber Boot, Test Leads and NIST Certificate Prices Start at $2199.00 Special Price $2089.00 save 5% MC-1210 New ClearBrite™ Display Large Easy to Read

Introducing the NEW MC-1210 multifunction temperature and process calibrator. It’s a rugged and reliable universal calibrator with the new ClearBrite High Graphic dual display and isolated read back The MC-1210 can power a transmitter under test while reading its milliamp output. Truly an all-in-one calibrator. The MC-1210 calibrator provides the functions and accuracy associated with fixed-installation, laboratory instrument, and has everything needed for virtually any calibration task. Measure and source thermocouples, RTDs, current, voltage, and frequency, and source pulse trains. A communications port compatible with both Fluke® 700 Series and Beta Calibrators pressure modules is provided, as is an isolated mA/V read-back circuit. Arrow keys, direct numeric keypad entry, and three software driven function buttons, plus a large backlit, menu-driven graphics display combine to provide a highly intuitive, simple yet powerful operator interface. With a built-in 250 Ohm resistor for HART® compatibility, the MC-1210 is compatibility with smart transmitters and PLCs, full fuse-less protection, are just some of the additional features that make the MC-1210 the single most indispensable tool available for virtually any calibration task. Features • New ClearBrite™ High Graphic Display • 3 Key Martel Menu System • Measure and source Thermocouples (13 types), RTDs (13 types), Ohms, current, voltage, frequency and source pulse trains signals • Isolated mA/V read-back circuit for complete transmitter calibration • Built-in 250 Ohm resistor for HART® compatibility • Communication port compatible with both Fluke 700 Series and Beta Calibrator pressure modules • Built-in 24V supply can drive 4 to 20mA loops up to 1000 Ohms • All source modes can be programmed with dedicated set-points to speed calibration and linearity tests • Highest accuracy in class to 0.015% of reading • Meets CE requirements and is designed to IEC 1000 safety standards

Specifications Environmental Operating Temperature: -10°C to +50°C (-14°F to 122°F) Storage Temperature: -20°C to +70°C (-4°F to 158°F) Stability: ±0.005% of reading/°C outside of 23 °C ± 5°C Power Requirements: 6Vdc; Batteries 4 AA alkaline (supplied) or optional rechargeable Mechanical Dimensions: 8.5" H x 4.8" W x 2.1" D (22 x 12 x 5.3 cm) Weight: 1.8 lbs (0.82 kg) Signal Specifications Voltage Read and Source Source: 0.000 to 20.000Vdc Read: Isolated 0.000 to 30.000Vdc Non-Isolated 0.000 to 20.000Vdc

Thermocouple Types and Ranges: See table below Accuracy: See Table Below Temperature scale: ITS90 mV Read/Source: -10.000 to +75.000 mV Current (mA) Source:0.000 to 24.000mA Read Isolated: 0.000 to 24.000mA Non-Isolated: 0.000 to 24.000mA Frequency (1 to 20 V selectable amplitude) CPM Source and Read:2.0 to 600.0 CPM Hz Source and Read: 1.0 to 1000.0 Hz kHz Source and Read: 1.0 to 10.00 kHz Pulse (Source only; 1 to 20 V selectable amplitude)  Pulses: 1 to 30,000.0 - 2 CPM to 10 kHz Ohms Source: 5.0 to 4000 Ohms Read: 0.00 to 4000.0 Ohms