MC1200/MC1000/DMC1400 Pressure Module

Pressure Modules Prices Start at $850.00 BPPA 100 BetaPort-P Pressure Module Adapter $250.00 MC1200,  MC1000 and DMC1400 Calibrators Sold Separately

The DMC1400, MC1200 and MC1000 Multifunction Calibrators can be used to measure pressure by using the BPPA-100 BETA Port Pressure Adapter. 29 standard BETA Calibrators pressure modules, covering gauge, vacuum, absolute, compound, and differential measurements are available. With the Model BPPA-100 BETA Port Pressure Adapter, the modules are fully compatible with the DMC1400, MC1200 and MC1000 Multifunction Calibrators. Pressure ranges may be displayed in any of 13 user-selectable units. Water density correction factors of 4°C, 20°C, or 60°F can be selected for either water column unit. The choice of pressure unit may be restricted by limitations on resolution of the instrument display. Features • 29 standard ranges • Gauge, vacuum, absolute, compound, and differential measurements • Accuracy specified over 15°C to 35°C range • Isolated and non-isolated measurements, range dependant For more information on the Beta Pressure modules, please contact us.

Available Ranges: (*Isolated=316SS Wetted Parts; Non-isolated=dry media only!!) Model Number PARAMETER RANGE FULL SCALE ACCURACY OVER PRESSURE   Gauge (PSIG) 910331-003 0 to 0.3 (0 to .02mBar) ±0.1 400% 910331-001 0 to 1 (0 to 7mBar) ±0.05 400% 910331-005 0 to 5 (0 to 350mBar)* ±0.025 ±0.003 psi 400% 910331-007 0 to 7.2 (0 to 500mBar)* ±0.035±0.0025 psi 300% 910331-010 0 to 10 (0 to 700mBar)* ±0.025 ±0.0025 psi 300% 910331-015 0 to 15 (0 to 1 Bar)* ±0.025 ±0.0025 psi 300% 910331-030 0 to 30 (0 to 2 Bar)* ±0.025 300% 910331-050 0 to 50 (0 to 3.5 Bar)* ±0.03 300% 910331-100 0 to 100 (0 to 7 Bar)* ±0.025 300% 910331-150 0 to 150 (0 to 10 Bar)* ±0.035 200% 910326-300 0 to 300 (0 to 20 Bar)* ±0.025 200% 910326-500 0 to 500 (0 to 35 Bar)* ±0.025 200% 910326-301 0 to 1000 (0 to 70 Bar)* ±0.025 200% 910326-315 0 to 1500 (0 to 100 Bar)*  ±0.035 200% 910326-303 0 to 3000 (0 to 200 Bar)* ±0.1 200% 910326-305 0 to 5000 (0 to 340 Bar)* ±0.1 200% 910331-10K 0 to 10000 (0 to 700 Bar)* ±0.1 150%   Vacuum (PSIG) 910327-005 0 to -5 (0 to -350 mBar) ±0.025%, ±0.003 psi 400% 910327-015 0 to -15 (0 to -1 mBar) ±0.025%, ±0.0025 psi 300%   Absolute (PSIA) 910332-015 0 to 15 (0 to 1 Bar)* ±0.025%, ±0.0025 psi 300% 910332-030 0 to 30 (0 to 2 Bar)* ±0.025% 300% 910332-050 0 to 50 (0 to 3.5 Bar)* ±0.03% 300% 910332-100 0 to 100 (0 to 7 Bar)* ±0.025% 300% 910332-300 0 to 300 (0 to 20 Bar)* ±0.025% 200%   Differential (PSID) 910329-005 0 to 5 (0 to 350 mBar) ±0.025%, ±0.003 psi 400% 910329-030 0 to 30 (0 to 2 Bar) ±0.025% 300% 910329-050 0 to 50 PSID (0 to 3.5 Bar) ±0.03% 300%   Compound (PSIG) 910333-015 -15 to 15 (-1 to 1 Bar) ±0.025%, ±0.0025 psi 300% 910333-030 -15 to 30 (-1 to 2 Bar) ±0.025%, ±0.0025 psi 300% * Isolated 316SS Wetted Parts, all others Non-isolated, dry media only. Notes: 1. Accuracy is percent of full scale range, over the 15 °C to 35 °C temperature range. Includes the pressure/temperature hysteresis in psi, where listed, for six months from date of last calibration. The accuracy statement shown in the specification table is the base accuracy from 15 °C to 35 °C. Outside this temperature range, add an additional ±0.0015% of FS per °C. To calculate the allowed deviation of a particular BETA Pressure Module, use the following formula: Deviation = ±%FS , ±T/P H, ±tempco where ±T/P H = thermal/pressure hysteresis in psi where applicable, And ±tempco = ±0.0015% FS/°C when the temperature is outside the 15-35 °C temperature range2. The Gauge, Vacuum, and Compound type range measurements are relative to atmospheric pressure. The Absolute type is a measurement made relative to absolute zero (perfect vacuum). The Differential type is a measurement made relative to the pressure applied to the low-pressure port of the module. 3. Units for display: pounds per square inch (psi), millibars (mbar), kilopond per square centimeter (kp/cm2, also kg/cm2), atmospheres physical (Atmos), kilopascals (kPa), MegaPascals (MPa), inches of Mercury @ 0 °C (InHg), millimeters of Mercury @ 0 °C (mmHg), inches of water column (InWC), centimeters of water column (cmWC), or one user-defined pressure unit. 4. These extended ranges are drerated because the calibrated range of the module does not match the range of the sensor. 5 The maximum static pressure is 200 psig (14 bar). 6. Relative to the calibration standard. 7. Thermal and pressure hysteresis = 0.0025 PSI (0.1724 mBar) 8. Thermal and pressure hysteresis = 0.0030 PSI (0.2068 mBar); all other ranges = no hysteresis 9. 0 to 7.2 PSI, 0 to 150 PSI, and 0 to 1500 PSI are extended ranges. 10. Gauge, Absolute, and Compound types are isolated and accept any media compatible with 316SS. Vacuum and Differentiated types are compatible with pressure media that are clean, dry, non-corrosive air or gas.