Log In        Register

LC110H Precision Milliamp Current Loop Calibrator with HART Communications

LC110H Precision Milliamp Current Loop Calibrator with HART Communications
    Price Starting At: $1,324.98

    Overview

    The new LC-110H mA (loop) calibrator is designed to take the loop calibrator class to the next level. The LC-110H differs from the standard LC-110 in that it incorporates HART communications and supports a select set of the HART universal and common practice commands. This unique feature allows the LC-110H to be used as both a loop calibrator and communication tool.
    Features
    • Built in selectable 250O resistor for HART communications>
    • Adjustable span selection (0 to 20mA or 4 to 20mA)
    • Best in Class Accuracy at 0.01% Reading
    • 24VDC loop power with mA Measure Mode (-25% to 125%)
    • Resolution of 1µA on mA ranges and 1mV on voltages ranges
    • Intuitive interface that features a Quick-Set Knob
    • Simple two wire connection for all measurements
    • Small Rugged design operates on (6) standard AAA batteries
    • Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
    • Variable step & ramp time in seconds
    Built in HART modem for communication capability to peform the following:
    • Read Message
    • Read Tag, Descriptor, Cal Date
    • Read Sensor PV Information
    • Read PV Output Information
    • Read Long Tag
    • Write PV Ranges (Upper and Lower)
    • Enter/Exit Fixed Current Mode
    • Set Zero Offset
    • Trim DAC Zero
    • Trim DAC Gain
    • Write Long Tag
    • Write Short Tags
    • Edit PV Units
    • Write Message and Descriptor
      Shipping Estimated Shipping 2 to 3 Weeks

    LC-110H Specifications
    Functions mA source, mA simulate, mA read, mA read/loop power and volts read
    Ranges mA (0 to 24mA) and Volts (0 to 30VDC)
    Resolution 1uA on mA ranges and 1mV on voltage range
    Accuracy 0.01% ± 2LSD all ranges (@23° +/- 5°C)
    Stability 20ppm of F.S./°C from -10°C to 18°C and 28°C to 55°C
    Loop Compliance Voltage 24VDC @ 20mA
    Over-Voltage Protection 240VAC
    Overload Current Protection 28mA DC
    Display 128 x 64 pixels, LCD Graphic w/backlight, 0.34" high digits
    Operating Temperature -10°C to 55°C
    Humidity range 10 to 95% non-condensing
    Power 6 AAA alkaline, lithium, or NiMH batteries
    Battery Life ≥ 40 hours continuous use (measure mode using alkaline)
    EMC EN61326 Annex A (Portable Instruments) EN61326 Annex A (Portable Instruments)
    Dimensions 6" x 3.6" x 1.3" (15 cm x 9 cm x 3 cm) (H x W x D)
    Weight 9.5 ounces (0.3 kg)
    Each LC110H Precision Milliamp Current Loop includes batteries, test leads, NIST Certificate with data, and manual.

    Related Products


    BetaLOG HART Software for LC-110H Milliamp Calibrator
    BetaLOG HART Software for LC-110H Milliamp Calibrator

    BetaLOG HART Software with Lemo to USB Cable, gives you the capability of getting information out of the LC-110H milliamp calibrator. Configuration data for up to 30 tags and Data logging capacity is 9800 records or 99 individual sessions.

    $305.00
    close