Log In        Register

LC-100 Precision Milliamp Loop Calibrator

LC-100 Precision Milliamp Loop Calibrator
    Price Starting At: $867.00

    Overview

    The LC100 Precision Process Milliamp Loop Calibrator provides significantly extended performance when compared to many competitive calibrators. With an accuracy of 0.015% of reading, with 0.001 mA resolution, the LC-100 has the highest accuracy in its class. Unique features, such as a "% Error" function, which eliminates manual error calculation and allows the display of the actual versus ideal error at any calibration point, put the LC100 way beyond similar instruments. The LC100 can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the LC100 enables remote calibration of 4 to 20mA devices.
    Features
    • Very high accuracy - ±0.015% of reading
    • Very high resolution - 0.001mA/0.001V
    • % Error function - eliminates manual error calculation
    • Extended adjustment range - digital knob and user-selectable decade output allow both large and incremental (0.001mA step) output changes
    • Reads 0 to 28.000 VDC
    • Built in 250 Ohm resistor facilitates calibration of HART device
    • Remote calibrations through Automatic Step and Ramp functions
    • Loop power measurements capability
    • Five preset outputs (4, 8, 12, 16, 20mA)
      Shipping Please Call for availability
    914-673-0333

    LC-100 Specifications
    Functions mA source, mA simulate, mA read, mA read/loop power, and volts read
    Ranges mA (0 to 24 mA) and Volts (0 to 30 VDC)
    Resolution 1uA on mA ranges and 1mV on voltage range
    Accuracy 0.01% ± 2 LSD all ranges (@23 °C ± 5°C)
    Stability 20ppm of FS/°C from -10°C to 18°C and 28°C to 55°C
    Loop Compliance Voltage 24VDC @ 20mA
    Over-Voltage Protection 240 VAC
    Overload Current Protection 28mA DC
    Operating Temperature -10°C to +55°C (14°F to 131°F)
    Storage Temperature -20°C to +70°C (-4°F to 158°F)
    Power Requirements 6AAA alklaline, lithium, or NiMH batteries
    Battery Life > 40 hours continuous use (measure mode using alkaline)
    Warm-up Time 1 minute to specification
    Dimensions 6" x 3.6" x 1.3' (H x W x D) 15 cm x 9 cm x 3 cm
    Weight 9.5 ounces (0.3 kg)
    EMC EN61326 Annex A (Portable Instruments)
    close