MP82700 Series Microprocessor Based 2-wire 4 to 20mA Temperature Transmitters

Mp82700 Series Microprocessor-Based Temperature Transmitter with Universal Input - Thermocouples, RTD's, millivolts and Ohms

Features
• New MP82700 FM or ATEX Approvals Standard
• Microprocessor Based
• Universal Input - Thermocouples, RTD's millivolts and Ohms
• Field Programmable with optional Programming Kit and PC Software
• Fully-Isolated and Linearized
• RFI/EMI-Immunity
• High Accuracy (0.1%)
• Small Size (1.7" dia. x 1.1"H)
• Optional Plug-In Display Readout & Protection Head
The Mp82700 Series is the industry’s smallest, most advanced 2-wire 4 to 20mA head mounted microprocessor based transmitter. Now available in two models the MP82710 or the MP82700 IS Intrinsically Safe. Both model can to fit in a small, standard connection head, it are easily field programmable to your exact requirements via an optional PC based "Point ‘N Click" software.
The Mp82700 Series incorporates highly advanced mathematical functions to provide the highest accuracy in the industry - 0.1% of set span. It is scalable over the entire range of 8 RTDs and 12 Thermocouple Types; as well as accepting Millivolt and Resistance inputs.

Model MP82700 IS Now

Mp82700 Thermocouple, RTD and Process 2 wire Transmitter.jpg

ATEX or FM Approved Standard

Prices Start at $160.00

Optional Field Programming Module

See Our Selection of Temperature

and Process Panel Meters

Additional feature of the Mp82700 Series transmitter includes small minimum spans, complete isolation (500V); selectable On/Off linearization; wide power supply capability (10 to 36 Vdc); selectable upscale/downscale; total RFI-immunity (DC to 1 GHz.); a five (5) year warranty against failure; and optional intrinsic safety approval. It even has an optional plug-in loop-powered readout and connection head with window.

You no longer have to stock several different transmitters when a single, low-cost, high accuracy unit can meet all of your requirements. The Mp82700 can easily be programmed in the field with the optional field programming module and PC based "Point 'n Click" software program in less than one minute, the Mp82700 can be used for all your different sensor and range requirements.

Specifications

MP82700 Approval Rating: ATEX EExib ib IIc T5 or FM IS/I/I/ABCD/T6
RTD Input: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100

Thermocouple Input Types: K, J, L, T, U, E, R, S, B, C, D, N

Other Inputs: mV and Ohms

Minimum Span: See Table Below

Output: 4 to 20mA or 20 to 4mA

Linearization: On/Off

Supply **: 10 to 36Vdc, Polarity Protected

Supply Effect: 0.001%/V

Max. Ripple: 10 V PP. Min Vbat=10Vdc

Zero Drift: ± 0.01%/°C or ±0.02°C/°C

Span Drift: ± 0.005%/°C or ±0.01°C/°C

Long Term Drift: ± 0.05%/Year

Cold Junction Drift: ± 0.01°C/°C

Excitation Current RTD: 0.1mA

Sensor Lead Resistance RTD: 500 Ohm max.

Sensor Lead Resistance Effect: 0.001°C/Ohm

Sensor Lead Resistance T/C: 10,000 Ohm max.

Open Circuit Detection: Upscale / Downscale

Load Capability: Vbat-10V/20mA

Response Time: <3 sec.

Startup Time: 20 sec.

Warm-up Time: 5 Min.

Isolation: 500 VDC

Ambient Operating Temp.: -40 to + 85°C.(-40 to 185°F)

Storage Temperature: -40 to +100°C (-40 to 212°F)

Ingress Protection: IP30

Housing Material: Zinc Alloy (ZAMAK 5) epoxy coated

Housing Dimension: 1.7" Dia. x 1.4" H (43mm Dia. x 36mm H)

Housing Dimension with Read-Out: 1.7" Dia. x 1.4" H (43mm Dia. x 36mm H)

SENSOR RANGE TABLE
Sensor Type
Temperature Range
Minimum Span
Thermocouple Types
J (Fe-CuNi)
-238
2192°F
90°F
-150
1200°C
50°C
K (NiCr-NiAl)
-328
2498°F
90°F
-200
1370°C
50°C
T (Cu-CuNi)
-328
752°F
90°F
-200
400°C
50°C
E (NiCr-CuNi)
-454
1832°F
90°F
-270
1000°C
50°C
N (Nicrosil-NiSil)
32
2372°F
90
0
1300°C
50°C
S (Pt10%Rh-Pt)
32
3209
450°F
0
1765°C
250°C
R (Pt13%Rh-Pt)
32
3209°F
450°F
0
1765°C
250°C
B (Pt30%Rh-Pt6%Rh)
32
3308°F
1080°F
0
1820°C
600°C
C (W5%Re-W26%Re)
32
4172°F
270°F
0
2300°C
150°C
D (W3%Re-W25%Re)
32
4172°F
270°F
0
2300°C
150°C
U (DIN Cu-CuNi)
-148
1112°F
90°F
-100
600°C
50°C
L (DIN Fe-CuNi)
-238
1652°F
90°F
-150
900°C
50°C
RTD'S Types
Pt100 IEC751
-328
1562°F
45°F
-200
850°C
25°C
Pt500 IEC751
-328
1562°F
45°F
-200
850°C
25°C
Pt1000 IEC751
-328
1562°F
45°F
-200
850°C
25°C
Ni100 IEC751
-76
482°F
45°F
60
250°C
25°C
Ni500 IEC751
-76
482°F
45°F
-60
250°C
25°C
Ni1000 IEC751
-76
482°F
45°F
-60
250°C
25°C
Cu10
-328
482°F
45°F
-200
250°C
25°C
Cu100
-328
482°F
45°F
-200
250°C
25°C
Process Signals
mV
0
1000
10
Ohm
0
10000
100

ATEX parameters (refer to certificate) KEMA 03ATEX 1419 X
Mp82700
CE 0344 Ex II 1 G EEx ia IIC T4...T6
Maximum Ambient Temperature
Temperature Class
+ 60°C
T6
+ 75°C
T5
+ 85°C
T4
* Supply circuit
KL5 and KL6
Input circuit
KL1...KL4
Ui =
30 V
Uo =
7.2 V
Ii =
100mA
Io =
58mA
Pi =
750mW
Po =
103mW
Li =
0mH
Lo =
10mH
Ci =
0nF
Co =
13.5µF

MP82000 Series Accessories Page

Mp82700 Thermocouple, RTD and Process 2 wire Transmitter with Optional Protection Head.jpg

Shown with Optional Display and Protection Head

Click Here To Order: Model MP82710 Microprocessor-Based Universal Input - Thermocouples, RTD's, millivolts and Ohms Transmitter. Prices start at $160.00.

Click Here To Order: Model MP82700 IS Microprocessor Based Universal Input - Thermocouples, RTD's, millivolts and Ohms Transmitter. Prices start at $195.00.

Click Here to Download Mp82700 Temperature Transmitter Specification

a

Multifunction Temperature and Process Calibrators, Thermocouple and mA Calibrators, Thermocouple and RTD Dry Block Calibrators, Portable Infrared Thermometers, Fixed Mounted Industrial Infrared Thermometers, Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters, Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers, MIST Microprocessor Based Integral Transmitter RTD Temperature Sensors, Industrial Test tools and Maintenance Kit, Indoor Air Quality (IAQ) and Test Meters, Hand Held Humidity and Air Flow Meters, Industrial Portable Refrigerant and Gas Leak Detection Meters, Pressure Measurement and Calibration Instruments

Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers * NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com
© 2006 - 2009 Temperature & Process Instruments, Inc.