Mp82700H Thermocouple and RTD Temperature Transmitter

MP82700H Microprocessor-Based, HART® Protocol Temperature Transmitter

ATEX parameters (refer to certificate) KEMA 03ATEX 1419 X

Mp82700

CE 0344 Ex II 1 G EEx ia IIC T4...T6

Maximum Ambient Temperature

Temperature Class

+ 60°C

T6

+ 75°C

T5

+ 85°C

T4

* Supply circuit

KL5 and KL6

Input circuit

KL1...KL4

Ui =

30 V

Uo =

7.2 V

Ii =

100 mA

Io =

58 mA

Pi =

750 mW

Po =

103 mW

Li =

0 mH

Lo =

10 mH

Ci =

0 nF

Co =

13.5 µF

Temperature Transmitters with HART Protocol
HART protocol transmitters

In order to use HART protocol you need a HART compatible interface and software or a handheld terminal. Connect with a resistor in the loop as required by HART. The transmitters know 14 universal commands and 5 common-practice commands:

*Universal Commands*
0	Read unique identifier
1	Read primary variable (PV)
2	Read Current and Percent of Range
3	Read Current and 4 dynamic variables 2 used
6	Write polling address
11	Read unique identifier associated with tag
12	Read message
13	Read tag, descriptor, date
14	Read PV sensor information
15	Read output information
16	Read final assembly number
17	Write message
18	Write tag, descriptor, date
19	Write final assembly number
*Common-Practice Commands*
34	Write damping value
35	Write range values
40	Enter/exit fixed current mode
49	Write PV sensor serial number
59	Write number of response preambles
*Device-Specific Command*
none

Previous Page

MP82000 Series Accessories Page

MP82700H HART® Transmitter

Mp82700H HART Protocol Thermocouple, RTD and Process 2 wire Transmitter with Optional Connection Head.jpg

Shown with Optional Display and DANW Protection Head

Click Here To Order: Model MP82700H HART® Protocol Microprocessor Based Transmitter. Prices start at $295.00.

Click Here to Download Mp82700 H Temperature Transmitter Specification

Multifunction Temperature and Process Calibrators, Thermocouple and mA Calibrators, Thermocouple and RTD Dry Block Calibrators, Portable Infrared Thermometers, Fixed Mounted Industrial Infrared Thermometers, Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters, Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers, MIST Microprocessor Based Integral Transmitter RTD Temperature Sensors, Industrial Test tools and Maintenance Kit, Indoor Air Quality (IAQ) and Test Meters, Hand Held Humidity and Air Flow Meters, Industrial Portable Refrigerant and Gas Leak Detection Meters, Pressure Measurement and Calibration Instruments

Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers * NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com
© 2006 - 2010 Temperature & Process Instruments, Inc.