Welcome to Temperature & Process Instruments, Inc.

MP82000 Series 2-wire Transmitter Accessories

Prices Start at $40.00

DANW Protection Head for MP80000 Series Transmitters This specially designed DANW connection head with window is suitable for the Mp82000 Series microprocessor based head mounting temperature transmitters with display (Direct Read Out). The Display will be connected by a connection cable with plugs. This is the same connection method as the Configuration Interface Connection Kit. Together with the display, a set of screws and connection nuts will be supplied.

Click to enlarge image

Material: Aluminum coated with high temperature-cured metallic-pigmented enamel. Temperature Range: -40° to 150°C (-40° to 300°F) Cover Closure: Screw Classification: NEMA 4X (IP65) Connection: 1/2” NPT Process, 1/2” NPT Conduit Window: Glass, 33mm diameter Application: All MP80000 μP-Based Transmitter with Plug-In Readout

Prices Start at $80.00

Head Mounted Display for MP82000 Transmitters The "Display" is a loop powered plug-in LCD readout for local display of the measured temperature.  Easy to connect on top of the transmitter with the interface connector. Models which can be supplied with option "D" (Plug-In Loop-Powered Readout) are: Mp82700(-H), Mp82800, Mp82800-R and Mp82850-R. Mounted inside the connection head with window you have local indication of the process parameter without opening the lid. Application: All MP80000 Microprocessor Based Transmitter with Plug-In Readout Dimensional Drawing Click to enlarge image

Prices Start at $290.00

Explosion-Proof Housing with Loop-Powered Process Indicator for All S-Products Microprocessor Based Transmitters . Large (1/2") LCD Readout 2-5/8" Glass Window . Explosion-Proof and Weather-Proof Housing . High Accuracy . Copper-Free Aluminum If you need a transmitter with a BIG READOUT for local indication, then the S-Products BI-Indicator is the one for you. Designed to be used with all of our MP82000 Series microprocessor based transmitters, it features a large (1/2"), high-contrast loop powered LCD readout and displays the actual measurement parameters in degrees (°F or °C), Millivolts, or Ohms. The BI-Indicator offers one of the most economical methods of providing local indication in the industry. The transmitter mounts within the enclosure and connection is made via a single small plug-in connector; eliminating the cost of extra connection heads. And, because it is both weather-proof as well as explosion-proof, it can be mounted virtually anywhere.

MP82000 Series Configuration Kit	Prices Start at $80.00
The interface and PC Based "Point 'n Click" software program is suitable for all microprocessor based (Mp82000) transmitters. USB connection now standard

Shop Our Online Store We accept the following credit cards: All Prices shown in US Dollars