Description
The DTG11 Series can be factory calibrated to your specific temperature
range, in units of ºC or ºF. The unique feature of the DTG11 is that it is fully field programmable. Process temperature change?
No problem! Simply use DTG-MIST interface module and re-range your DTG11 without the need to recalibrate or loss of accuracy.
It is much more accurate than an RTD and a separate indicator/transmitter. When the DTG11 is re-scaled to a different temperature
range, the calibrated default values are not lost. This gage can be customer
re-calibrated by performing one-point or two-point calibration using known temperature standards. This is where the DTG11
leaves competition behind. Indicating temperature range, current output, switch set point, switching
hysteresis, switch logic,
damping and other features all programmable.
The DTG11 wetted parts, as well as the housing, are fabricated from stainless
316. The probe is either of 1/4" or 3/8" diameter as standard. As an option, other diameters and materials are available.
The electrical connector, a Micro-DC male plug, can also be made available from stainless housing. The RTD element used is
Pt100 standard accuracy to IEC751 Class B. The 4 to 20mA output feature allows a single process connection to be used
for indication of temperature and for remote indication, recording, or controlling. Each DTG11 has the part number, range
and serial number marked on the transmitter housing. If you require an accurate, stable and dependable digital thermometer,
look no further. Model DTG11 is your solution.
