Log In        Register

Yokogawa CA330 RTD Temperatuer Calibrator

CA330 RTD Temperature Calibrator
    Price Starting At: $900.00

    Overview

    The CA330 RTD Calibrator is a high accuracy source and measure portable handheld temperature calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. CA330 corresponds to 14 types of RTD for sourcing. It achieves the high basic accuracy of 0.3°C (typical of Pt100), which enables it to operate a highly reliable test.
    Features
    • Measure and source 14 types of RTD standard (JIS/IEC/GOST R)
    • Basic accuracy: 0.3°C (Typical of PT100)
    • Corresponds to 2,3,4 wire. Realizes RTD simulation
    • Step sweep, Linear sweep, Manual step, Span check
    • Measures RTD sensor output as a thermometer
    • Sub display displays resistance source and span%
      Shipping Estimated Shipping 1 to 2 weeks

    CA330 RTD Calibrator Temperature Source/Measurement Specifications
    RTD Type Coefficient Temperature Range
    Pt100 0.3851 -200.0 to 800.0°C
    Pt100 0.3850 -200.0 to 630.0°C
    Pt100 0.3916 -200.0 to 510.0°C
    Pt100 0.3926 -200.0 to 630.0°C
    Pt200 0.3851 -200.0 to 630.0°C
    Pt500 0.3851 -200.0 to 630.0°C
    Pt1000 0.3851 -200.0 to 630.0°C
    CU10 0.427 -100.0 to 260.0°C
    Ni120 0.627 -80.0 to 260.0°C
    Pt50 0.3851 -200.0 to 630.0°C
    Pt50G - -200.0 to 800.0°C
    Pt100G - -200.0 to 600.0°C
    Cu50M - -180.0 to 200.0°C
    Cu100M - -180.0 to 200.0°C
    Accuracy is specified at ambient temperature (Ta) of 23±5°C
    Temperature effect: 0.05°C/°C is added for other ambient temperature (Ta<18°C, Ta > 28°C)
    The display resolution for source / measure is 0.1°C
    Above accuracy is specified for 4 wire measuring
    Accuracy for 3 wire measuring: 1.0°C to Cu10; 0.6°C to Pt50, Pt50G and Cu50M; 0.3°C to other RTD is each added, on condition the resistance of all cables are the same
    Accuracy for 2 wire measuring: Same with 3 wire measuring excluding resistance of cables
    CA330 RTD Calibrator Resistance Source/Measurement Specifications
    Resistance Source and Measure Range
    500Ω 0.00 to 550.00Ω
    3000Ω 0.00 to 3300.00Ω
    Accuracy is specified at ambient temperature (Ta) of 23±5°C. Temperature effect: Add the accuracy of ±(0.005% of range)/°C for other ambient temperature (Ta<18°C, Ta > 28°C)
    Above accuracy is defined for 4-wire measuring
    Accuracy for 3 wire measuring: 0.05O to 500Ω range; 0.2Ω to 3000Ω range is added, on condition the resistance of all cables are the same
    Accuracy for 2 wire measuring: Same with 3 wire measuring on condition the resistance of cables are excluded
    CA330 RTD Calibrator General Specifications
    Display Segment LCD
    Backlight LED (Selection of "Constantly ON", "Constantly OFF" or "Auto off by approx. 2min")
    Display refresh rate Approx. 1 sec.
    Warm-up time Approx. 5min.
    Power supply Four alkaline AA batteries, Dedicated AC Adapter (Sold separately)
    Battery lilfe 50 hours (5V source, load over 10kΩ), 25 hours (20mA source, load under 5V)
    Auto Power Off Approx. 20min. (Disabled by setting)
    Dimensions Approx. 90 (W) × 192 (H) × 42 (D)mm
    Weight Approx. 440g
    Standard Safety: EN61010-1 / EN61010-2-030
    EMC: EN61326-1 Class A Table 2. EN55011 Class A Group 1
    Operating temperature / humidity ranges -10 to 55°C
    20 to 80%RH (without condensation)
    Storage temperature / Humidity ranges 0 to 60°C
    90% RH or less (without condensation)
    Each CA330 includes Carrying case (B9108NK), Lead cables( a set of 1 black and 3 red lead wires for generation and measurement (98035), Binding post (Red Black 1 piece (99045), Binding post (Red Red 1 piece (99046), four AA alkaline batteries and Instruction manual
    close