Log In        Register

CA150 Multifunction Temperature and Process Calibrator

CA150 Multifunction Temperature and Process Calibrator
    Price Starting At: $2,244.00

    Overview

    The Yokogawa Handy Calibrator CA150 calibrator is a comprehensive calibration instrument that simultaneously signals source and measurement operations at the same time. The CA150 calibrator's source and measurement functions include temperature from Thermocouple or RTD (Resistance Temperature Detectors) sensors, DC voltage, DC current, resistance, and frequency. The Yokogawa CA150 calibrator is also perfect for the maintenance and equipment diagnosis of process devices such as transmitters, thermostats, and signal converters.
    Features
    • Measure and source Thermocouples (10 types), RTD's, DC voltage, DC current, Resistance, and Frequency
    • Source and measurement can be performed simultaneously
    • Vertical body with large-screen display
    • Loop power supply function (24 VDC at a load of max 22 mA)
    • It is possible to measure current in the mA range while supplying power
    • Communication Functions Serial interface RS232 D-Sub 9-pin connector
    • Sweep Functions (Automatic Output Functions)
      Shipping Estimated Shipping 1 to 2 weeks

    CA150 Multifunction Temperature and Process Calibrator Specifications
    Communication functions Serial interface RS232 D-Sub 9-pin connector
    Memory functions Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement).
    Power supply 6 AA size alkaline batteries. AC adapter or dedicated NiMH battery (sold separately)
    Battery life Conditions Approx. 8 hours, Simultaneous Source/measurement Output of 5 Vdc
    Operating temperature
    Humidity range
    0 to 40°C
    20 to 80%RH (no condensation)
    Storage Temperature -20 to 60°C 90%RH or less (no condensation)
    Auto power-off Approx. 10 minutes
    Insulation resistance Between input terminal and output terminal: 500 VDC, 50MΩ or more
    Withstand voltage Between measurement terminal and generation terminal: 350 VAC, 1 minute
    Dimensions 251 x 124 x 70 mm
    Weight Approx. 1000 g
    Conforming Standards Safty EN61010-1
    EMC EN 61326 Class B;EN 55011 Class B Group1 EN 61000-3-2; EN 61000-3-3, EN61326
    CA150 Calibrator Source Specifications
    Range Resolution Source range Accuracy Remark
    DC Voltage 100mV 1uV 0 to ±110.000mV ±(0.02%+10uV) Output resistance: Approx. 6.5Ω
    1V 10uV 0 to ±30.00V ±(0.02% +10mV) Maximum output: 10 mA, output resistance: Approx. 30mΩ
    10V 0.1mV 0 to ±11.0000V ±(0.02%+0.05mV) Maximum output: 10 mA, output resistance: Approx. 30mΩ
    30V 10mV 0 to ±30.00V ±(0.02%+0.05mV) Maximum output: 10 mA
    DC current mA SINK 20mA 1uA 0 to +22.000mA ±(0.025%+3uA) Maximum load: 24V
    20mASINK 1uA 0 to +22.000mA ±(0.025%+6uA) External power supply: 5 to 28 V
    OHM 500Ω 0.01Ω 0 to 550.00Ω ±(0.02%+0.1Ω) Excitation current: 1 to 5 mA or maximum output: 2V 2*
    5kΩ 0.1Ω 0 to 5.5000kΩ ±(0.05%+1.5Ω) Excitation current: 0.1 to 0.5 mA or maximum output: 2V
    50kΩ 0 to 55.000kΩ ±(0.1%+50Ω) Excitation current: 0.01 to 0.1 mA or maximum output: 2V
    RTD 2* Pt100
    JPT100
    0.1°C -200.0 to 850.0°C
    -200.0 to 500.0°C
    ±(0.025%+0.3°C) Excitation current: 1 to 5 mA 2*
    Thermocouple Type J 0.1°C -200.0 to -100.0°C (-328 to -148°F)
    -100.0 to 1200.0°C (-148 to 1472°F)
    ±(0.02%+0.7°C)
    ±(0.02%+0.4°C)
    See Note 3 Below
    Type K 0.1°C -200.0 to -100.0°C (-328 to -148°F)
    -100.0 to 1372.0°C (-148 to +2501°F)
    ±(0.02%+0.8°C)
    ±(0.02%+0.5°C)
    See Note 3 Below
    Type T 0.1°C -200.0 to -100.0°C (-328 to -148°F)
    -100.0 to 400.0°C (-148 to +752°F)
    ±(0.02%+0.8°C)
    ±(0.02%+0.5°C)
    See Note 3 Below
    Type E 0.1°C -200.0 to -100.0°C (-328 to -148°F)
    -100.0 to 1000.0°C (-148 to +1832°F)
    ±(0.02%+0.6°C)
    ±(0.02%+0.4°C)
    See Note 3 Below
    Type N 0.1°C -200.0 to 0.0°C (-328 to +32°F)
    0.0 to 1300.0°C (32 to 2372°F)
    ±(0.02%+1.0°C)
    ±(0.02%+0.5°C)
    See Note 3 Below
    Type L 0.1°C -200.0 to 900.0°C (-328 to +1652°F) ±(0.02%+0.5°C) See Note 3 Below
    Type U 0.1°C -200.0 to 0.0°C (-328 to +32°F)
    0.0 to 400.0°C (32 to 752°F)
    ±(0.02%+0.7°C)
    ±(0.02%+0.5°C)
    See Note 3 Below
    Type R 1°C 0 to 100°C (32 to +212°F)
    100 to 1768°C (212 to 3214°F)
    ±(0.02%+2°C)
    ±(0.02%+1.2°C)
    See Note 3 Below
    Type S 1°C 0 to 100°C (32 to +212°F)
    100 to 1768°C (212 to 3214°F)
    ±(0.02%+2°C)
    ±(0.02%+1.2°C)
    See Note 3 Below
    Type B 1°C 600 to 1000°C (1112 to 1832°F)
    1000 to 1820°C (1832 to 3308°F)
    ±(0.02%+1.5°C)
    ±(0.02%+1°C)
    See Note 3 Below
    Frequency/Pulse 100Hz 0.01Hz 1.00 to 110.00Hz ±0.05Hz Output voltage: +0.1 V to +11 V (Zero-base waveform)
    Amplitude accuracy: ±10%
    Maximum load current: 10 mA
    Pulse cycle: 1 to 60000 cycles *4
    1000Hz 0.1Hz 90.0 to 1100.0Hz ±0.05Hz Output voltage: +0.1 V to +11 V (Zero-base waveform)
    Amplitude accuracy: ±10%
    Maximum load current: 10 mA
    Pulse cycle: 1 to 60000 cycles *4
    10kHz 0.1kHz 0.9kHz to 11.0kHz ±0.1kHz Output voltage: +0.1 V to +11 V (Zero-base waveform)
    Amplitude accuracy: ±10%
    Maximum load current: 10 mA
    Pulse cycle: 1 to 60000 cycles *4
    50kHz 1kHz 9kHz to 50kHz ±1kHz Output voltage: +0.1 V to +11 V (Zero-base waveform)
    Amplitude accuracy: ±10%
    Maximum load current: 10 mA
    Pulse cycle: 1 to 60000 cycles *4
    CPM 0.1CPM 1.0 to 1100.0CPM 9kHz to 50kHz ±0.5CPM
    Notes
    *1 Depending on the internal settings, either ITS-90 or IPTS-68 can be selected.
    *2 Excitation current Is: In the case of 0.1 mA to 1 mA or less, {0.05/ls (mA)} (Ω) or add {0.12/ls (mA)} (°C)
    *3 RJC accuracy is not included in the thermocouple generation accuracy. Reference temperature compensation is carried out by the separately sold RJ sensor.
    To compensate for the reference contact temperature in the output, add the RJ sensor accuracy.
    Output compensation: Every 10 seconds RJ sensor specifications
    Measured temperature range: -10 to 50°C
    Accuracy: 18 to 28°C: ±0.5°C (combination with the main unit)
    Other than above: ±1.0°C (combination with the main unit)
    *4 The same ranges of frequencies
    CA150 Calibrator Measurement Specifications
    Range Resolution Source range Accuracy Remark
    DC Voltage 500mV 10uV 0 to ±500.00mV ±(0.02%+50uV) Input resistance: 1000MΩ or more
    5V 0.1mV 0 to ±5.0000V ±(0.02% +5mV) Input resistance: Approx. 1MΩ
    35V 1mV 0 to ±35.000V ±(0.025%+5mV) Input resistance: Approx. 1MΩ
    DC current 20mA 1uA 0 to +22.000mA ±(0.025%+3uA) Input resistance: Approx. 20Ωor less
    DC current 100mA 10uA 0 to ±0 to 100.00mA ±(0.04%+30uA) Input resistance: Approx. 20Ωor less
    OHM 500Ω 0.01Ω 0 to 500.00Ω ±(0.055%+0.075Ω) Measurement current: Approx. 1 mA
    5kΩ 0.1Ω 0 to 5.0000kΩ ±(0.055%+0.75Ω) Measurement current: Approx. 100 µA
    50kΩ 0 to 50.000kΩ ±(0.055%+10Ω) Excitation current: 0.01 to 0.1 mA or maximum output: 2V
    RTD 2* Pt100
    JPT100
    0.1°C -200.0 to 850.0°C
    -200.0 to 500.0°C
    ±(0.025%+0.3°C) Excitation current: 1 to 5 mA 2*
    Thermocouple Type J 0.1°C -200.0 to 1200.0°C (-328 to 1472°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type K 0.1°C -200.0 to 1372.0°C(-328 to +2501°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type T 0.1°C -200.0 to 400.0°C (-328 to +752°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type E 0.1°C -200.0 to 1000.0°C (-328 to 1832°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type N 0.1°C -200.0 to 1300.0°C (-328 to 2372°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type L 0.1°C -200.0 to 900.0°C (-328 to +1652°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type U 0.1°C -200.0 to 400.0°C (-328 to +752°F) ±(0.05%+1.5°C)/-100°C or more
    ±(0.05%+2°C)/-100°C or less
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type R 1°C 0 to 1768°C (32 to 3214°F) ±(0.05%+2°C)/100°C or more
    ±(0.05%+3°C)/100°C or les
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type S 1°C 0 to 1768°C (32 to 3214°F) ±(0.05%+2°C)/100°C or more
    ±(0.05%+3°C)/100°C or les
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Type B 1°C 600 to 1800°C (1112 to 3308°F) ±(0.05%+2°C)/100°C or more
    ±(0.05%+3°C)/100°C or les
    A temperature coefficient is added if the display of the
    temperature monitor is outside the range of 18 to 28°C.
    Pulse 100Hz 0.01Hz 1.00 to 110.00Hz ±2 dtg Maximum input: 30 V
    Sensitivity: 0.5 Vp-p
    Input resistance: 100kΩ
    Contact input: Up to 100 Hz
    1000Hz 0.1Hz 90.0 to 1100.0Hz ±2 dtg Maximum input: 30 V
    Sensitivity: 0.5 Vp-p
    Input resistance: 100kΩ
    Contact input: Up to 100 Hz
    10kHz 0.001kHz 0.001 to 11.000kHz ±2 dtg Maximum input: 30 V
    Sensitivity: 0.5 Vp-p
    Input resistance: 100kΩ
    Contact input: Up to 100 Hz
    CPM CPM 1CPM 0 to 100000 CPM -- Maximum input: 30 V
    Sensitivity: 0.5 Vp-p
    Input resistance: 100kΩ
    Contact input: Up to 100 Hz
    CPH CPH 1CPH 0 to 100000 CPH -- Maximum input: 30 V
    Sensitivity: 0.5 Vp-p
    Input resistance: 100kΩ
    Contact input: Up to 100 Hz
    Loop Power Supply 24v Loop 24V±2V Maximum load current: 22mA
    Temperature coefficient: Accuracy above x (1/10)/°C
    The temperature coefficient is added in the ranges from 0 to 18°C and from 28 to 40°C
    Each CA150 is supplied with Source lead cables, Measurement lead cables, Terminal adapter, Carrying case, 6 AA-size alkaline batteries, Fuse and users manual.
    close