|
|
 |
TPI 721 Hand Held Combustible Gas Detector
|
Warning and Precaution
The
Combustible GAS detector is a leak locating tool and is not intended for use as a confined-space,
personal safety tool. It will not specifically identify a gas or a CFC, and it does not tell you the precise level of a combustible
gas or CFC that may be present. |
| |
|
TPI 721
Hand Held Combustible Gas Leak
Detector
The TPI 721 offers 10ppm sensitivity to detect combustible gasses. Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable “tic” rate helps eliminate background gas concentration in contaminated
environments.
Features
• Combustible Gas Leak Detector capable of displaying real ppm, stepped ppm, and %LEL (Lower Explosive Limit).
• Gases Detected (partial listing): Acetone, Acetylene, Alcohol, Ammonia, Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen,
Methane, Naphtha, Natural Gas, Paint Thinners, Propane and Solvents
• 10ppm sensitivity (methane)
• Detect combustible gases including natural gas, propane, butane, etc.
• Thumbwheel adjustable tic rate to locate leaks quickly and accurately
• Two line display with bar-graph and backlight
• Audio/Visual alarm indication with user adjustable alarm point
• Earphone jack for use in noisy environments
• Approximately 20 hours of continuous use ( 2 "C" cell alkaline batteries)
• Flexible 16'' gooseneck with visual alarm indicator in sensor housing
|
|
721 Combustible Gas
Leak Detector |

|
721 Gas Detector
Prices Start $295.00
|
|
|
Specifications
Dimensions: 9.4" x 2.9" x 2.2" (240mm x 74mm x 55mm)
Goose Neck Length: 16" with visual alarm indicator in sensor housing
Battery: 2 Alkaline "C" size
Leak Detection Sensitivity (methane): 10ppm
Display Type: Dual display with analog bargraph and backlight
Display Modes: Real (ppm), Leak Level (stepped ppm), %LEL
Ranges:
Real ppm: 0 to 9999ppm
Stepped ppm: 0, 500, 1000, 3000, 5000, 9999 ppm
Lower Explosive Limit (%LEL): 0 to 19.9%
Audible Leak Indication: Adjustable tic rate via side thumb wheel
Alarm Indication: Visual and audible (User adjustable alarm level)
Sensor Test and Zero: Automatic at start up
Operating Temperature: 32 to 122°F (0 to 50°C)
|
 |
|
|
Each Unit includes, soft
pouch carrying
case, batteries,
operators manual.
|
|
| |
Warning and Precaution
The Combustible GAS detector is a leak locating tool and is not intended for use as a confined-space,
personal safety tool. It will not specifically identify a gas or a CFC, and it does not tell you the precise level of a combustible
gas or CFC that may be present. |
High concentrations
of combustible gas/CFC can cause explosions, fires, asphyxia, and other hazards that could cause serious personal injury or
death. Be informed on the characteristics and hazards of the gas/CFC you are working with, and use proper precautions
to avoid hazardous atmospheres.
|
|
Multifunction Temperature and Process Calibrators,
Thermocouple and mA Calibrators,
Thermocouple and RTD Dry Block Calibrators,
Portable Infrared Thermometers,
Fixed Mounted Industrial Infrared Thermometers,
Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters,
Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers,
MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors,
Industrial Test tools and Multimeters, Indoor Air
Quality (IAQ) and Test Meters,
Hand Held Humidity and Air Flow Meters,
Industrial Portable
Refrigerant and Gas Leak Detection Meters,
Pressure Measurement and Calibration Instruments,
Boiler Flue Gas
Combustion Emission Analyzers,
Solar Radiation Meter
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710 Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2012 Temperature & Process Instruments, Inc.
|
|
|
 |