|
|
 |
3001
Precision
Lab Calibrator
2 Channel Multifunction Calibrator
|
3001 Multifunction Calibrator
Price Start at $5250.00 |
|
• RS232, USB and IEEE-488 remote control
•
Compatible with Fluke Met/Cal®
software
•
Isolated measurement channel
•
Two (2) voltage ranges: 10V and
100 V DC
•
Milliamp range 0 to 52mA
•
Milliamp range with simultaneous
24 VDC power
•
Selectable 250 Ohm HART™ resistor
•
Accuracy of 0.005% of reading on
voltage ranges
|
Pressure Mode
The 3001 operates with all
Martel BetaPort
series pressure modules using the
BPPA module adapter and covers pressure ranges from
0 to 10" of water to 10,000 psi. Pressure can be
displayed in a wide range of engineering units with
up to 0.025% Full Scale accuracy. The 3001 also
supports Fluke 700 series pressure modules.
Total Setpoint Control
A
SHIFT key provides easy access to the setpoint
controls of the 3001. Up to nine setpoints can be
defined for each output mode and each thermocouple
and RTD type. Setpoints are recalled individually at
the touch of three buttons, SHIFT , SETPOINT
(SPT)
button and then the
corresponding numeric keys 1-9. Any number of
sequential setpoints can be stepped through
automatically, with complete control of dwell time.
Either way, for rapid setup of repeatable tests, no
other instrument comes close to the Martel 3001.
Remote
Control
All of the 3001 operating
functions can be accessed via RS-232, IEEE-488 or
USB using a standard PC running Fluke Met/Cal®
software, Windows® HyperTerminal or other software
using an ASCII protocol. Custom control programs may
be written using programming software such as C++.
Switching between LOCAL and REMOTE is as simple as
touching the SHIFT (4) and LOCAL buttons.
Rock-Solid
Stability
The 3001
stability and accuracy is traceable to NIST
standards. The accuracy of the 3001 is specified for
both 90-day and one-year intervals. Manual zero
calibrations can be made on all T/C and pressure
functions to eliminate offsets.
Flexible
Output
Five-way copper alloy
binding posts provide a wide range of connection
options. A standard pressure module connector is
provided, as is the CJC T/C mini-jack.
Isolated Measurement Channel
The 3001 features a fully isolated measurement channel which allows the user to calibrate process transmitters
and signal isolators. In reality it’s like having two instruments in one! This channel also incorporates a 24 volt loop power supply to power 2-wire transmitters and a HART interface resistor
enabling direct connection to HART
communicators,
Key features are:
Two voltage ranges 10V and 100VDC
Milliamp range 0 to 52mA
Milliamp range with simultaneous 24 volt power (0 to 24ma)
Selectable 250 ohm HART resistor Accuracy of 0.005% of reading on all ranges
|
|
|
|
|
|
3001
Precision
Multifunction Calibrator
|
|
Each instrument includes
Communication Interface, NIST Certificate of Calibration, Instruction Manual
and line cord.
|
|
|
|
|
|
|
Multifunction Temperature and Process Calibrators,
Thermocouple and mA Calibrators,
Thermocouple and RTD Dry Block Calibrators,
Portable Infrared Thermometers,
Fixed Mounted Industrial Infrared Thermometers,
Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters,
Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers,
MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors,
Industrial Test tools and Multimeters, Indoor Air
Quality (IAQ) and Test Meters,
Hand Held Humidity and Air Flow Meters,
Industrial Portable
Refrigerant and Gas Leak Detection Meters,
Pressure Measurement and Calibration Instruments,
Boiler Flue Gas
Combustion Emission Analyzers,
Solar Radiation Meter
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2012 Temperature & Process Instruments, Inc. |
|
|
|
