|
|
 |
Industrial True RMS 700 Amp Clamp-On
Meter and DMM, Test Tool to Meet Your Test and Measurement Needs
|
|
|
|
TPI 296 True RMS AC/DC
700 Amp Clamp Meter
The 296 is a
clamp-on meter plus DMM with True RMS
and Harmonics capabilities. The
296 offers measurements in all
basic electrical functions,
plus: • True RMS
Provides accurate and
dependable readings of
non-linear loads. • HDR
Mode Determines if a signal
is clean or distorted. •
Bar Graph When measuring
frequency, bar graph indicates
current level. • TRIM
Mode Smooth out unstable
readings. • Peak Mode
For start-up and inrush
currents. • Sleep Mode
Preserves battery life.
• Data Hold Holds the reading on the
display for easy viewing
Features
• 4000 Count LCD Display
with Bargraph
•
Measure 700 Amps AC or DC
• Measure 600 Volts
AC or DC • True RMS for
more accurate measurements •
Auto/manual ranging
Applications
•
Heat anticipator
current in thermostats
•
Line voltage
•
Control circuit
voltage
•
Heating element
resistance
•
Compressor winding
resistance
•
Contactor and relay
coil resistance
•
Motor and compressor
start up current
•
Continuity of wiring
|
296 Digital AC/DC
Clamp Meter
Prices Start at $190.00

|
|
|
Specifications
DC Voltage: Max Range:600V
Max Resolution: 0.01V
Basic Accuracy: 0.75%
AC Voltage: Max Range:600V
Max Resolution: 0.01V
Basic Accuracy: 1%
DC Amps: Max Range:700A
Max Resolution: 0.01A
Basic Accuracy: 2%
AC Amps: Max Range:700A
Max Resolution: 0.01A
Basic Accuracy: 2%
Resistance: Max Range:40KΩ
Max Resolution:0.1Ω
Basic Accuracy: 1%
Frequency: Max Range:10KHz
Max Resolution:0.1Hz
Basic Accuracy: 0.2%
Frequency: Max Range:10KHz
Max Resolution:0.1Hz
Basic Accuracy: 0.2%
|
Continuity Buzzer: <100Ω
Diode Test: Yes
True RMS Response:
Yes
Peak Hold:
Yes
Relative Mode:
No
Min/Max Record:
No
Data Hold:
Yes
% Total Harmonic Distortion: Yes
Range Selection:
Auto/Manual
Display Type:
4000 count LCD with analog bargraph
Operating Temperature:
14°F to 113°F
Relative Humidity:
80% non-condensing
Storage Temperature:
-4°F to 131°F
Battery Type:
9V (MN1604)
Battery Life:
80hrs typical
Auto Off / Sleep Mode:
Yes
Dimensions (H x L x W):
1.5” x 7.25” x 2.5”
Weight:
11.1oz
Agency Approval:
CE IEC 1010: CAT III, 600V cULus
3111-1
|
|
|
|
|
|
|
Each unit is
supplied with
Battery, Carrying Case, Test Lead
Set and Instruction Manual.
|
|
|
|
| |
|
We accept the following credit cards: All Prices shown in US Dollars
*Free UPS Ground Shipping on orders over $200.00. * Free UPS Ground Shipping valid for shipping address in the United States to continuous 48 states. Please Note Free UPS Ground shipping does not apply to Dry Block Calibrators.
|
|
 |
|
|
|
Multifunction Temperature and Process Calibrators, Thermocouple and mA Calibrators, Thermocouple and RTD Dry Block Calibrators, Portable Infrared Thermometers, Fixed Mounted Industrial Infrared Thermometers, Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters, Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers, MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors,
Industrial Test tools and Maintenance Kit, Indoor Air
Quality (IAQ) and Test Meters, Hand Held Humidity and Air Flow Meters, Industrial Portable
Refrigerant and Gas Leak Detection Meters, Pressure Measurement and Calibration Instruments
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710 Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2010 Temperature & Process Instruments, Inc.
|
|
|
 |