Secure Checkout
Industrial 183A True RMS Digital Multimeter

Thumbnail Filmstrip of Industrial 183A True RMS Digital Multimeter Images

    Industrial 183A True RMS Digital Multimeter

    Overview

    The TPI 183A is a true RMS auto-ranging Digital Multi-Meter. The backlit LCD can display three readings at one time. In addition to basic functions of ACV, DCV, ACA, DCA, Diode Test and continuity, the 183A measures Frequency (Hz) and Capacitance. The 183A also has RS232 output and software for recording information into a PC.
    Features
    • Large 4000 count Backlit Display with Analog Bargraph
    • True RMS for more accurate measurements
    • Auto/manual ranging
    • Duty cycle to measure the amount of time the motor is on
    • Low pass filter for noisy environments
    • Separate battery and fuse compartment
    • Auto power off
    • IR serial interface
    Price Starting At:
    $160.00
    Need help? Contact us with questions.

      Shipping Estimated Shipping 1 to 3 Weeks
    183A DMM Measuring Specifications
    Parameters Maximum Range Maximum Resolution Basic Accuracy
    DC Voltage 1000 V 0.01 mV ±0.05%
    AC Voltage 750 V 0.01 mV ±0.4%
    DC Amps 10 A 0.01µA ±0.8%
    AC Amps 10 A 0.01µA ±0.75%
    Resistance 40MΩ 0.1mΩ ±0.05%
    Frequency 10mHz 0.01Hz ±0.05%
    Capacitance 400µF 0.01nF ±3%
    183A General Specifications
    Display 4,000 Count, 2 times per second update
    Continuity Buzzer Audible at less than 300Ω
    Diode Test 2.7V at 1mA maximum output
    True RMS Response Yes
    Duty Cycle Range: 0.1 to 99.9%
    Accuracy: 0.1% + 1 count
    Conductance No
    Pulse Width No
    Data Hold Yes
    Min/Max Record Yes
    Time Stamp Logging No
    Relative Mode No
    Operating Temperature 32°F to 113°F (00 to 45°C)
    Relative Humidity 0 to 80% non-condensing
    Storage Temperature -4°F to 131°F (-20 to 55°C)
    Battery Type 2 Each 1.5 Volt AA Batteries
    Battery Life 200 hrs typical
    Auto Off Yes 15 min.
    Dimensions 1.3" x 3.4" x 7.4" (H x L x W)
    Weight 12 oz
    Agency Approval CE 61010-1 Over Voltage: CAT II - 1000V, CAT III, 600V
    Each unit is supplied with Battery, Rubber Boot, Test Lead Set and Instruction Manual.